FlashWall X3 - 1800

• Model: FlashWall X3
• Protection width: 1.75 m (5.7 ft)
• Protection height: 0.5 m (20 in)
• Mounting options: wall brackets or optional suction cups
• Folding design for carry-bag storage

These are the protection dimensions stated in the 2024 guide, not overall panel or shipping dimensions. Confirm specifications for the model supplied in your market.

Choose the wall bracket system or optional suction cup system to suit the entrance. Brackets can be bolted to suitable concrete, brick, stone, wood and metal, or glued to suitable glass and metal. Suction cups require suitable smooth surfaces such as glass or metal.

Confirm opening measurements, side-closer fit and the mounting configuration before ordering. Follow the complete pre-installation and deployment instructions. Confirm the exact components supplied with your order.

Use on flat, continuous, clean, non-permeable ground that allows full contact with the barrier. Sweep the deployment area first. Gravel, sand, grass and grates are unsuitable.

FlashWall inhibits water entering through building entry points. It does not protect against water permeating through the ground, walls or window and door frames. Correct installation, maintenance and storage are essential.

After use in floodwater, rinse with clean water and dry fully before storage. Do not use strong alkaline or acidic detergents, thinner or benzene. Store indoors, protected from damage, with no heavy weight on the system.

Repair visible damage before use. The 2024 guide specifies an operating temperature range of -5°C to 50°C and a reuse limit of 30, conditional on correct use, cleaning, maintenance and storage.