FlashWall Suction Kit

The optional suction cup system diagram lists:

• 2 suction cup frames - F00001
• 2 extender gaskets - F60009
• 2 extra suction cup gasket bottom pieces - F60011

Confirm the contents of the kit supplied with your order.

The guide lists a utility knife and measuring tape for suction cup pre-installation; acrylic glue is not required for this mounting option.

Follow the complete instructions to unfold and straighten the canvas and latex layer, fit the side closers, compress the bottom gaskets and tighten the wheels. Incorrect setup can increase seepage.

Use on flat, continuous, clean, non-permeable ground that allows full contact with the barrier. Sweep the deployment area first. Gravel, sand, grass and grates are unsuitable.

FlashWall inhibits water entering through building entry points. It does not protect against water permeating through the ground, walls or window and door frames. Correct installation, maintenance and storage are essential.

After use in floodwater, rinse with clean water and dry fully before storage. Do not use strong alkaline or acidic detergents, thinner or benzene. Store indoors, protected from damage, with no heavy weight on the system.

Repair visible damage before use. The 2024 guide specifies an operating temperature range of -5°C to 50°C and a reuse limit of 30, conditional on correct use, cleaning, maintenance and storage.