FlashWall Bracket Kit

Name: FlashWall Bracket Kit
Brand: AquaFence
Availability: InStock

JPY 0

AquaFence confirmation is required before ordering. Send your opening details and photos. AquaFence will review the fit and confirm the model, mounting arrangement and complete parts list in writing before you place an order.

The displayed price is for the listed item. Your written quotation confirms the complete configuration, quantities, delivery and applicable terms. This enquiry does not place an order or take payment.

Prepare the mounting points for your FlashWall with the wall bracket system described in the FlashWall Product Guide 2024.

Wall brackets can be bolted to suitable concrete, brick, stone, wood and metal surfaces. They can also be glued to suitable glass and metal. Choose the fixing method for the substrate and confirm the kit contents and compatibility with AquaFence before ordering.

Accurate bracket spacing is essential so the side closers connect and seal correctly. Follow the measurement and side-closer customization instructions for your model.

When bonding to glass, clean and dry the surface first and allow the adhesive to cure before applying load. The guide lists a utility knife, measuring tape and two-component acrylic glue for wall-bracket pre-installation; the fixing method depends on the substrate.
After use in floodwater, rinse with clean water and dry fully before storage. Do not use strong alkaline or acidic detergents, thinner or benzene. Store indoors, protected from damage, with no heavy weight on the system.

Repair visible damage before use. The 2024 guide specifies an operating temperature range of -5°C to 50°C and a reuse limit of 30, conditional on correct use, cleaning, maintenance and storage.

FlashWall Bracket Kit

Pre-installation

Deployment

Site suitability

Care and storage